Tag Archives: Xi

a short word on profile likelihood

Profile likelihood is an interesting theory to visualize and compute confidence interval for estimators (see e.g. Venzon & Moolgavkar (1988)). As we will use is, we will plot

http://freakonometrics.blog.free.fr/public/perso5/proflike01.gif

But more generally, it is possible to consider

http://freakonometrics.blog.free.fr/public/perso5/profilik06.gif

where http://freakonometrics.blog.free.fr/public/perso5/profilik03.gif. Then (under standard suitable conditions)

http://freakonometrics.blog.free.fr/public/perso5/profilik05.gif

which can be used to derive confidence intervals.

> base1=read.table(
+ "http://freakonometrics.free.fr/danish-univariate.txt",
+ header=TRUE)
> library(evir)
> X=base1$Loss.in.DKM
> u=5

The function to draw the profile likelihood for the tail index parameter is then

> Y=X[X>u]-u
> loglikelihood=function(xi,beta){
+ sum(log(dgpd(Y,xi,mu=0,beta))) }
> XIV=(1:300)/100;L=rep(NA,300)
> for(i in 1:300){
+ XI=XIV[i]
+ profilelikelihood=function(beta){
+ -loglikelihood(XI,beta) }
+ L[i]=-optim(par=1,fn=profilelikelihood)$value }
> plot(XIV,L,type="l")

It is possible to use it that profile likelihood function to derive a confidenceinterval,

> PL=function(XI){
+ profilelikelihood=function(beta){
+ -loglikelihood(XI,beta) }
+ return(optim(par=1,fn=profilelikelihood)$value)}
> (OPT=optimize(f=PL,interval=c(0,3)))
$minimum
[1] 0.6315989

$objective
[1] 754.1115
> up=OPT$objective
> abline(h=-up)
> abline(h=-up-qchisq(p=.95,df=1)/2,col="red")
> I=which(L>=-up-qchisq(p=.95,df=1)/2)
> lines(XIV[I],rep(-up-qchisq(p=.95,df=1)/2,length(I)),
+ lwd=5,col="red")
> abline(v=range(XIV[I]),lty=2,col="red")

This is done with the following code

> library(ismev)
> gpd.profxi(gpd.fit(X,5),xlow=0,xup=3)

Tail index estimation

These data were collected at Copenhagen Reinsurance and comprise 2167 fire losses over the period 1980 to 1990, They have been adjusted for inflation to reflect 1985 values and are expressed in millions of Danish Kron. Note that it is possible to work with the same data as above but the total claim has been divided into a building loss, a loss of contents and a loss of profits.

> base1=read.table(
+ "http://freakonometrics.free.fr/danish-univariate.txt",
+ header=TRUE)
> base2=read.table(
+ "http://freakonometrics.free.fr/danish-multivariate.txt",
+ header=TRUE)

Consider here the first dataset (we deal – so far – with univariate extremes),

> X=base1$Loss.in.DKM
> D=as.Date(as.character(base1$Date),"%m/%d/%Y")
> plot(D,X,type="h")

The graph is the following,

A natural idea is then to plot

http://freakonometrics.hypotheses.org/files/2015/12/hill01.gif

i.e.

> Xs=sort(X)
> logXs=rev(log(Xs))
> n=length(X)
> plot(log(Xs),log((n:1)/(n+1)))

Points are on a straight line here. The slope can be obtained using a linear regression,

> B=data.frame(X=log(Xs),Y=log((n:1)/(n+1)))
> reg=lm(Y~X,data=B)
> summary(reg)

Call:
lm(formula = Y ~ X, data = B)

Residuals:
Min       1Q   Median       3Q      Max
-0.59999 -0.00777  0.00878  0.02461  0.20309

Coefficients:
Estimate Std. Error t value Pr(>|t|)
(Intercept)  0.089442   0.001572   56.88   <2e-16 ***
X           -1.382181   0.001477 -935.55   <2e-16 ***
---
Signif. codes:  0 ‘***’ 0.001 ‘**’ 0.01 ‘*’ 0.05 ‘.’ 0.1 ‘ ’ 1

Residual standard error: 0.04928 on 2165 degrees of freedom
Multiple R-squared: 0.9975,	Adjusted R-squared: 0.9975
F-statistic: 8.753e+05 on 1 and 2165 DF,  p-value: < 2.2e-16

> reg=lm(Y~X,data=B[(n-500):n,])
> summary(reg)

Call:
lm(formula = Y ~ X, data = B[(n - 500):n, ])

Residuals:
Min       1Q   Median       3Q      Max
-0.48502 -0.02148 -0.00900  0.01626  0.35798

Coefficients:
Estimate Std. Error t value Pr(>|t|)
(Intercept)  0.186188   0.010033   18.56   <2e-16 ***
X           -1.432767   0.005105 -280.68   <2e-16 ***
---
Signif. codes:  0 ‘***’ 0.001 ‘**’ 0.01 ‘*’ 0.05 ‘.’ 0.1 ‘ ’ 1

Residual standard error: 0.07751 on 499 degrees of freedom
Multiple R-squared: 0.9937,	Adjusted R-squared: 0.9937
F-statistic: 7.878e+04 on 1 and 499 DF,  p-value: < 2.2e-16

> reg=lm(Y~X,data=B[(n-100):n,])
> summary(reg)

Call:
lm(formula = Y ~ X, data = B[(n - 100):n, ])

Residuals:
Min       1Q   Median       3Q      Max
-0.33396 -0.03743  0.02279  0.04754  0.62946

Coefficients:
Estimate Std. Error t value Pr(>|t|)
(Intercept)  0.67377    0.06777   9.942   <2e-16 ***
X           -1.58536    0.02240 -70.772   <2e-16 ***
---
Signif. codes:  0 ‘***’ 0.001 ‘**’ 0.01 ‘*’ 0.05 ‘.’ 0.1 ‘ ’ 1

Residual standard error: 0.1299 on 99 degrees of freedom
Multiple R-squared: 0.9806,	Adjusted R-squared: 0.9804
F-statistic:  5009 on 1 and 99 DF,  p-value: < 2.2e-16

The slope here is somehow related to the tail index of the distribution. Consider some heavy tailed distribution, i.e. http://freakonometrics.hypotheses.org/files/2015/12/hill03.gif, so that http://freakonometrics.hypotheses.org/files/2015/12/hill27.gif, where http://freakonometrics.hypotheses.org/files/2015/12/hill28.gif is some slowly varying function. Equivalently, the exists a slowly varying function http://freakonometrics.hypotheses.org/files/2015/12/hill29.gif such that http://freakonometrics.hypotheses.org/files/2015/12/hill30.gif. Then

http://freakonometrics.hypotheses.org/files/2015/12/hill33.gif

i.e. since a natural estimator for http://freakonometrics.hypotheses.org/files/2015/12/hill35.gif is the order statistic http://freakonometrics.hypotheses.org/files/2015/12/hill36.gif, the slope of the straight line is the opposite of tail index http://freakonometrics.hypotheses.org/files/2015/12/hill98.gif. The estimator of the slope is (considering only the http://freakonometrics.hypotheses.org/files/2015/12/hill99.gif largest observations)

http://freakonometrics.hypotheses.org/files/2015/12/hill39.gif

Hill‘s estimator is based on the assumption that the denominator above is almost 1 (which means that  http://freakonometrics.hypotheses.org/files/2015/12/hill15.gif, as http://freakonometrics.hypotheses.org/files/2015/12/hill16.gif), i.e.

http://freakonometrics.hypotheses.org/files/2015/12/hill02.gif

Note that, if http://freakonometrics.hypotheses.org/files/2015/12/hill14.gif, but not two fast, i.e. http://freakonometrics.hypotheses.org/files/2015/12/hill15.gif as http://freakonometrics.hypotheses.org/files/2015/12/hill16.gif, then http://freakonometrics.hypotheses.org/files/2015/12/hill12.gif (one can even get http://freakonometrics.hypotheses.org/files/2015/12/hill11.gif  with stronger convergence assumptions). Further

http://freakonometrics.hypotheses.org/files/2015/12/hill04.gif

Based on that (asymptotic) distribution, it is possible to get a (asymptotic) confidence interval for http://freakonometrics.hypotheses.org/files/2015/12/hill98.gif

> xi=1/(1:n)*cumsum(logXs)-logXs
> xise=1.96/sqrt(1:n)*xi
> plot(1:n,xi,type="l",ylim=range(c(xi+xise,xi-xise)),
+ xlab="",ylab="",)
> polygon(c(1:n,n:1),c(xi+xise,rev(xi-xise)),
+ border=NA,col="lightblue")
> lines(1:n,xi+xise,col="red",lwd=1.5)
> lines(1:n,xi-xise,col="red",lwd=1.5)
> lines(1:n,xi,lwd=1.5)
> abline(h=0,col="grey")

It is also possible to work with http://freakonometrics.hypotheses.org/files/2015/12/hill06.gif, then http://freakonometrics.hypotheses.org/files/2015/12/hill05.gif. And similarly http://freakonometrics.hypotheses.org/files/2015/12/hill13.gif as http://freakonometrics.hypotheses.org/files/2015/12/hill14.gif (and again http://freakonometrics.hypotheses.org/files/2015/12/hill10.gif with additional assumptions on the rate of convergence), and

http://freakonometrics.hypotheses.org/files/2015/12/hill09.gif

(obtained using the delta-method). Again, we can use that result to derive (asymptotic) confidence intervals

> alpha=1/xi
> alphase=1.96/sqrt(1:n)/xi
> YL=c(0,3)
> plot(1:n,alpha,type="l",ylim=YL,xlab="",ylab="",)
> polygon(c(1:n,n:1),c(alpha+alphase,rev(alpha-alphase)),
+ border=NA,col="lightblue")
> lines(1:n,alpha+alphase,col="red",lwd=1.5)
> lines(1:n,alpha-alphase,col="red",lwd=1.5)
> lines(1:n,alpha,lwd=1.5)
> abline(h=0,col="grey")

The Deckers-Einmahl-de Haan estimator is

http://freakonometrics.hypotheses.org/files/2015/12/hill25.gif

where for

http://freakonometrics.hypotheses.org/files/2015/12/hill21.gif

Then (given again conditions on the speed of convergence i.e. http://freakonometrics.hypotheses.org/files/2015/12/hill14.gif, with http://freakonometrics.hypotheses.org/files/2015/12/hill15.gif as http://freakonometrics.hypotheses.org/files/2015/12/hill16.gif),

http://freakonometrics.hypotheses.org/files/2015/12/hill42.gif

Finally, Pickands‘ estimator

http://freakonometrics.hypotheses.org/files/2015/12/hill26.gif

it is possible to prove that, as http://freakonometrics.hypotheses.org/files/2015/12/hill14.gif,

http://freakonometrics.hypotheses.org/files/2015/12/hill41.gif

Here the code is

> Xs=rev(sort(X))
> xi=1/log(2)*log( (Xs[seq(1,length=trunc(n/4),by=1)]-
+ Xs[seq(2,length=trunc(n/4),by=2)])/
+ (Xs[seq(2,length=trunc(n/4),by=2)]-Xs[seq(4,
+ length=trunc(n/4),by=4)]) )
> xise=1.96/sqrt(seq(1,length=trunc(n/4),by=1))*
+sqrt( xi^2*(2^(xi+1)+1)/((2*(2^xi-1)*log(2))^2))
> plot(seq(1,length=trunc(n/4),by=1),xi,type="l",
+ ylim=c(0,3),xlab="",ylab="",)
> polygon(c(seq(1,length=trunc(n/4),by=1),rev(seq(1,
+ length=trunc(n/4),by=1))),c(xi+xise,rev(xi-xise)),
+ border=NA,col="lightblue")
> lines(seq(1,length=trunc(n/4),by=1),
+ xi+xise,col="red",lwd=1.5)
> lines(seq(1,length=trunc(n/4),by=1),
+ xi-xise,col="red",lwd=1.5)
> lines(seq(1,length=trunc(n/4),by=1),xi,lwd=1.5)
> abline(h=0,col="grey")

It is also possible to use maximum likelihood techniques to fit a GPD distribution over a high threshold.

> library(evd)
> library(evir)
> gpd(X,5)
$n
[1] 2167

$threshold
[1] 5

$p.less.thresh
[1] 0.8827873

$n.exceed
[1] 254

$method
[1] "ml"

$par.ests
xi      beta
0.6320499 3.8074817

$par.ses
xi      beta
0.1117143 0.4637270

$varcov
[,1]        [,2]
[1,]  0.01248007 -0.03203283
[2,] -0.03203283  0.21504269

$information
[1] "observed"

$converged
[1] 0

$nllh.final
[1] 754.1115

attr(,"class")
[1] "gpd"

or equivalently (or almost)

> gpd.fit(X,5)
$threshold
[1] 5

$nexc
[1] 254

$conv
[1] 0

$nllh
[1] 754.1115

$mle
[1] 3.8078632 0.6315749

$rate
[1] 0.1172127

$se
[1] 0.4636270 0.1116136

The interest of the latest function is that it is possible to visualize the profile likelihood of the tail index,

> gpd.profxi(gpd.fit(X,5),xlow=0,xup=3)

or

> gpd.profxi(gpd.fit(X,20),xlow=0,xup=3)

Hence, it is possible to plot the maximum likelihood estimator of the tail index, as a function of the threshold (including a confidence interval),

> GPDE=Vectorize(function(u){gpd(X,u)$par.ests[1]})
> GPDS=Vectorize(function(u){
+ gpd(X,u)$par.ses[1]})
> u=c(seq(2,10,by=.5),seq(11,25))
> XI=GPDE(u)
> XIS=GPDS(u)
> plot(u,XI,ylim=c(0,2))
> segments(u,XI-1.96*XIS,u,XI+
+ 1.96*XIS,lwd=2,col="red")

Finally, it is possible to use block-maxima techniques.

> gev.fit(X)
$conv
[1] 0

$nllh
[1] 3392.418

$mle
[1] 1.4833484 0.5930190 0.9168128

$se
[1] 0.01507776 0.01866719 0.03035380

The estimator of the tail index is here the last coefficient, on the right.
Since it is rather difficult to install a package in class rooms, here is the source of rcodes used here (to fit a GPD for exceedances)

> source("http://freakonometrics.blog.free.fr/public/code/gpd.R")

Next time, we will discuss how to use those estimators.