When introducing the SIR model, in our initial post, we got an ordinary differential equation, but we did not really discuss stability, and periodicity. It has to do with the Jacobian matrix of the system. But first of all, we had three equations for three function, but actually\displaystyle{{\frac{dS}{dt}}+{\frac {dI}{dt}}+{\frac {dR}{dt}}=0}so it means that our problem is here simply in dimension 2. Hence\displaystyle {\begin{aligned}&X={\frac {dS}{dt}}=\mu(N-S)-{\frac {\beta IS}{N}},\\[6pt]&Y={\frac {dI}{dt}}={\frac {\beta IS}{N}}-(\mu+\gamma)I\end{aligned}}and therefore, the Jacobian of the system is\begin{pmatrix}\displaystyle{\frac{\partial X}{\partial S}}&\displaystyle{\frac{\partial X}{\partial I}}\\[9pt]\displaystyle{\frac{\partial Y}{\partial S}}&\displaystyle{\frac{\partial Y}{\partial I}}\end{pmatrix}=\begin{pmatrix}\displaystyle{-\mu-\beta\frac{I}{N}}&\displaystyle{-\beta\frac{S}{N}}\\[9pt]\displaystyle{\beta\frac{I}{N}}&\displaystyle{\beta\frac{S}{N}-(\mu+\gamma)}\end{pmatrix}We should evaluate the Jacobian at the equilibrium, i.e. S^\star=\frac{\gamma+\mu}{\beta}=\frac{1}{R_0}andI^\star=\frac{\mu(R_0-1)}{\beta}We should then look at eigenvalues of the matrix.

Our very last example was

times = seq(0, 100, by=.1) p = c(mu = 1/100, N = 1, beta = 50, gamma = 10) start_SIR = c(S=0.19, I=0.01, R = 0.8) resol = ode(y=start_SIR, t=times, func=SIR, p=p) plot(resol[,"time"],resol[,"I"],type="l",xlab="time",ylab="") |

We can compute values at the equilibrium

mu=p["mu"]; beta=p["beta"]; gamma=p["gamma"] N=1 S = (gamma + mu)/beta I = mu * (beta/(gamma + mu) - 1)/beta |

and the Jacobian matrix

J=matrix(c(-(mu + beta * I/N),-(beta * S/N), beta * I/N,beta * S/N - (mu + gamma)),2,2,byrow = TRUE) |

Now, if we look at the eigenvalues,

eigen(J)$values [1] -0.024975+0.6318831i -0.024975-0.6318831i |

or more precisely 2\pi/b where a\pm ib are the conjuguate eigenvalues

2 * pi/(Im(eigen(J)$values[1])) [1] 9.943588 |

we have a damping period of 10 time lengths (10 days, or 10 weeks), which is more or less what we’ve seen above,

The graph above was obtained using

p = c(mu = 1/100, N = 1, beta = 50, gamma = 10) start_SIR = c(S=0.19, I=0.01, R = 0.8) resol = ode(y=start_SIR, t=times, func=SIR, p=p) plot(resol[1:1e5,"time"],resol[1:1e5,"I"],type="l",xlab="time",ylab="",lwd=3,col="red") yi=resol[,"I"] dyi=diff(yi) i=which((dyi[2:length(dyi)]*dyi[1:(length(dyi)-1)])<0) t=resol[i,"time"] arrows(t[2],.008,t[4],.008,length=.1,code=3) |

If we look carefully. at the begining, the duration is (much) longer than 10 (about 13)… but it does converge towards 9.94

plot(diff(t[seq(2,40,by=2)]),type="b") abline(h=2 * pi/(Im(eigen(J)$values[1])) |

So here, theoretically, every 10 weeks (assuming that our time length is a week), we should observe an outbreak, smaller than the previous one. In practice, initially it is every 13 or 12 weeks, but the time to wait between outbreaks decreases (until it reaches 10 weeks).

OpenEdition suggests that you cite this post as follows:

Arthur Charpentier (March 20, 2020). Modeling pandemics (2). *Freakonometrics*. Retrieved August 11, 2024 from https://doi.org/10.58079/ovev

## One thought on “Modeling pandemics (2)”